In Reply to: 9600 combine Feeder House reverse posted by Jolly Rancher on March 20, 1999 at 21:02:46 CST:
I had the same problem with a 95 model 9600. The problem was a worn roll pin and key on the reverser gear box main shaft. It was'nt to hard or costly to repair, I only ran the machine another 300 hours before trading it off. It is possible it could have been something else I did'nt catch. The only thing I could determine that could have caused the premature failure was the header shaft seemed to have a vibration in it like had been hit or bent, so I replaced it also. The combine only had 1000 cyl. hours on it when I had troubles. The new shaft was'nt any straiter than the old one. I hope this helps, Bryan