In Reply to: Questions from way back... Ray Steukle's book posted by Trent on July 10, 2008 at 08:48:50:
71151724 SPROCKET will speed up the clean grain conveyor and elevator. It is a 14-19 tooth. There will be no problem with the slide pan - unless it tis fractured or warped on your K - this is not the limiting factor. Most K/F2's have the bin loader auger worn out. This is important on capacity esp if you speed it up.
We have drilled the std sprocket and bolted an 18 up to a 20 tooth sprocket on the F2's std 14-14 (the chain will line up with a little tweaking) when using a 630 corn head. Do not use this on wheat or soybeans as it will accelerate the wear big time when not loaded.