In Reply to: TR 97 grain tank auger removal posted by JD on July 14, 2007 at 20:22:47:

JD,

A couple of things. First, besure the grain tank auger is balanced and tne shaft straight before you put it in. We have very good luck putting on new flighting. Also while you have the auger out of the bottom of the bin it is a good time to put the stainless steel liner in the bottom of the grain tank under the auger.

While you have the unloading auger off take a look at the ring that's in the pivot part of the unloading system. It usually has a worn area on it and it can be rectified by rotating the ring part way around. You should have a better than new unloading system when you get it back together.

Good luck!